Sheet in PP-H AlphaPlus 2000x1000 mm gray

PP-H AlphaPlus is a nucleated polypropylene homopolymer. AlphaPlus means with an alpha nucleator, an additive that gives a more even crystal structure and better dimensional stability. The material is stiffer than standard PP-H and takes 20 degrees more heat.

The density is 0.91 g/cm³, the tensile modulus 1700 MPa and the yield strength 33 MPa. The elongation at yield is 8 percent and the notched Charpy impact strength 9 kJ/m². Shore D is 72. The temperature range is 0 to +120 °C in short term testing.

The building fire class is B2 and the material is approved for direct food contact. The surface resistivity is very high.

AlphaPlus suits structural parts where stiffness and dimensional stability under load matter more than maximum impact strength. The material is machined like ordinary PP-H.

Thanks to the more even crystal structure the sheets warp less during sawing and milling. Weld with hot air or a welding rod as for standard PP.

This sheet in PP-H AlphaPlus is gray and measures 2000x1000 mm, which suits cutting boards, linings, splash guards and machine guards. With the dimensions 2000x1000 mm and the surface in gray you get a sheet in PP-H AlphaPlus that is particularly well suited to large workpieces that are to be cut to size. Do you want this sheet in PP-H AlphaPlus with the dimensions 2000x1000 mm and the surface in gray cut or trimmed to your measurements? Add CTS to the cart.

Do you need technical documentation? Call us directly.